sE Electronics DM2 Dynamite 1-channel Active Inline Preamp

Now in Stock at ThePedalGuy

The DM2 TNT lets you choose between a moderate +15dB or explosive +30dB of gain with an ultra-high impedance input and eight load settings to perfectly match any passive microphone. Resulting in explosive level for all your passive mics. For all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound.

Main DM2 Features

• Switchable, clean and consistent gain from moderate +15dB to explosive +30dB
• designed for neutral, balanced sound quality with minimal noise
• explore eight settings ranging from an unconventionally low 50 Ω to stunningly high 10 MΩ to match your preamp with any mic accurately
• two gain levels for even higher flexibility on various sources
• ruthlessly boosts the signal independent from load impedance or cable length

Whether you’re a podcaster, recording engineer, or running live sound, sE inline preamps are the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration.

Reliable operation even in demanding on-stage applications in difficult environments is ensured by a roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards.

SOPHISTICATED CLASS-A ELECTRONICS

• State of the art electronics and high-grade FETs provide supremely low noise
• Transformerless design for pristine sound quality
• Provides the lowest noise in its class

DEDICATED OUTPUT BUFFER AMPLIFIER

• Provides +28dB or +15dB / +30dB output independent of load impedance or cable length
• Extremely low output impedance
• Drives long cable runs and can reduce susceptibility to RF interference, buzz & hum

SLIM, RUGGED ALL-METAL HOUSING WITH PREMIUM FINISH

• Efficient rejection of any electrical interference and noise
• High-quality finish ensures a great look for many years
• Slim design allows for easy placement in the studio or on stage

DM2 TNT Specs

• Frequency Range: 10 Hz - 120,000 Hz (-0.3 dB)
• Gain: 15 dB / 30 dB
• Max output level (0.5% THD): 9.5 dBV (3.0 V)
• Output noise level: 1 μV @ 15 dB / 6.6 μV @ 30 dB
• Powering: 48 Volts according to IEC 61938
• Electrical impedance: 135 Ohms
• Recommended load impedance: >1k Ohms
• Current consumption: 3.1 mA
• Connectivity: 3-pin male/female XLR connector
• Dimensions: Diameter: 19 mm (0.75 in.) Length: 95.5 mm (3.76 in.)
• Weight: 80 g (2.82 oz.)

• input: passive microphone (ribbon/dynamic)
• output: preamp/mixer/audio interface providing 48V phantom power

• not suitable for phantom-powered microphones (condenser microphones, active ribbon microphones)